LogoLogo
V-OneNOVABack to Voltera.io
  • V-One Support
  • Getting Started
    • Quickstart Videos
    • Hello World Project
      • 1. Safety Guidelines
      • 2. Printer Setup
      • 3. Getting Started with your First Print
      • 4. Dispensing Solder Paste
      • 5. Reflow and Assembly
      • 6. Maintaining the V-One
    • Punk Console Project
      • 1. Safety Guidelines
      • 2. Double Sided PCB Workflow
      • 3. Drill Attachment Setup
      • 4. Drilling the Holes
      • 5. Printing the Circuit
      • 6. Adding Rivets
      • 7. Dispensing Solder Paste
      • 8. Reflow and Assembly
    • Introducing Conductor 3
  • V-One Fundamentals
    • Circuit Design Guidelines
    • Print Settings Overview
    • General Settings
    • V-One Maintenance
    • Mounting the V-One's Tools
    • Understanding Alignment
    • Understanding Probe Issues
    • Understanding Print Height
    • Curing Conductive Ink
    • Choosing Solder Paste
    • Reflowing Solder Paste
    • Working with Rivets
    • Hand Soldering to Ink
    • PCB Design Export Guides
      • KiCad
      • OrCAD
      • EAGLE
      • Altium
  • Mastering Your V-One
    • Improving Print Quality
    • Aligned Printing
    • Purging Solder Paste
    • Filling an Empty Cartridge
    • Creating a Custom Ink Profile
    • Designing with PCB Templates
  • Troubleshooting
    • USB Connection Problems
    • Gerber Files Fail to Load
    • No Ink or Paste Comes Out
    • Cleaning Clogged Nozzles
    • Broken Nozzles
    • Difficulty Soldering
    • Measuring X-Axis Backlash
    • XY Center Different than Calibrated
    • P- Switch Did not Trigger
    • Z-min Switch Error
    • Installing on macOS 10.15 Catalina
  • Downloads
    • Download the V-One Software
    • User Manuals
    • Safety Data Sheets
    • Technical Data Sheets
    • Voltera CAM File for EAGLE
    • Substrates and Templates
    • Wallpapers
Powered by GitBook
On this page
  • Gerber Export Guide
  • Design Rule Check

Was this helpful?

  1. V-One Fundamentals
  2. PCB Design Export Guides

EAGLE

PreviousOrCADNextAltium

Last updated 1 year ago

Was this helpful?

Gerber Export Guide

For EAGLE v9.0.1+ users, we have a pre-configured CAM file for exporting your Gerbers:

  1. Download and extract the

  2. Open your board in EAGLE.

  3. Run the CAM Processor - Navigate to File > CAM Processor.

  4. Within the CAM Processor window, select File > Open > Job, and select the Voltera CAM file.

  5. Click 'Process Job'. This will generate the Gerbers and save them in a outputs folder in the same directory as your .brd file.

Design Rule Check

To ensure your circuit can be printed by the V-One. We recommend downloading the Design Rule Check file as well. This will help catch design rule errors before printing your circuit.

To use the Voltera DRC, do the following:

  1. Download and extract the

  2. Open your design in EAGLE

  3. From the menu bar, click Tools > DRC

  4. Click Load... and select the voltera.dru file

Voltera CAM file
Voltera DRU file