LogoLogo
V-OneNOVABack to Voltera.io
  • V-One Support
  • Getting Started
    • Quickstart Videos
    • Hello World Project
      • 1. Safety Guidelines
      • 2. Printer Setup
      • 3. Getting Started with your First Print
      • 4. Dispensing Solder Paste
      • 5. Reflow and Assembly
      • 6. Maintaining the V-One
    • Punk Console Project
      • 1. Safety Guidelines
      • 2. Double Sided PCB Workflow
      • 3. Drill Attachment Setup
      • 4. Drilling the Holes
      • 5. Printing the Circuit
      • 6. Adding Rivets
      • 7. Dispensing Solder Paste
      • 8. Reflow and Assembly
    • Introducing Conductor 3
  • V-One Fundamentals
    • Circuit Design Guidelines
    • Print Settings Overview
    • General Settings
    • V-One Maintenance
    • Mounting the V-One's Tools
    • Understanding Alignment
    • Understanding Probe Issues
    • Understanding Print Height
    • Curing Conductive Ink
    • Choosing Solder Paste
    • Reflowing Solder Paste
    • Working with Rivets
    • Hand Soldering to Ink
    • PCB Design Export Guides
      • KiCad
      • OrCAD
      • EAGLE
      • Altium
  • Mastering Your V-One
    • Improving Print Quality
    • Aligned Printing
    • Purging Solder Paste
    • Filling an Empty Cartridge
    • Creating a Custom Ink Profile
    • Designing with PCB Templates
  • Troubleshooting
    • USB Connection Problems
    • Gerber Files Fail to Load
    • No Ink or Paste Comes Out
    • Cleaning Clogged Nozzles
    • Broken Nozzles
    • Difficulty Soldering
    • Measuring X-Axis Backlash
    • XY Center Different than Calibrated
    • P- Switch Did not Trigger
    • Z-min Switch Error
    • Installing on macOS 10.15 Catalina
  • Downloads
    • Download the V-One Software
    • User Manuals
    • Safety Data Sheets
    • Technical Data Sheets
    • Voltera CAM File for EAGLE
    • Substrates and Templates
    • Wallpapers
Powered by GitBook
On this page

Was this helpful?

  1. Getting Started

Punk Console Project

Previous6. Maintaining the V-OneNext1. Safety Guidelines

Last updated 7 months ago

Was this helpful?

Note: This tutorial is for advanced users, complete the Hello World tutorial first!

For this tutorial, we are going to be building Voltera's version of an . It is a simple circuit that creates old school synth sounds using a piezo buzzer as a speaker. The circuit consists of a 556 IC (two 555 timers), an LED, a few capacitors, some resistors, two trimpots, and the piezo buzzer.

Adjusting the trimpots will change either the frequency or width of the electric pulses creating different sounds. Check out the end of to see it in action!

The Punk Console Project requires the optional V-One Drill Attachment.

We have included all the materials and components you need to print the Punk Console. If you need another kit, you can grab one from .

our store
Atari Punk Console
this video