LogoLogo
V-OneNOVABack to Voltera.io
  • V-One Support
  • Getting Started
    • Quickstart Videos
    • Hello World Project
      • 1. Safety Guidelines
      • 2. Printer Setup
      • 3. Getting Started with your First Print
      • 4. Dispensing Solder Paste
      • 5. Reflow and Assembly
      • 6. Maintaining the V-One
    • Punk Console Project
      • 1. Safety Guidelines
      • 2. Double Sided PCB Workflow
      • 3. Drill Attachment Setup
      • 4. Drilling the Holes
      • 5. Printing the Circuit
      • 6. Adding Rivets
      • 7. Dispensing Solder Paste
      • 8. Reflow and Assembly
    • Introducing Conductor 3
  • V-One Fundamentals
    • Circuit Design Guidelines
    • Print Settings Overview
    • General Settings
    • V-One Maintenance
    • Mounting the V-One's Tools
    • Understanding Alignment
    • Understanding Probe Issues
    • Understanding Print Height
    • Curing Conductive Ink
    • Choosing Solder Paste
    • Reflowing Solder Paste
    • Working with Rivets
    • Hand Soldering to Ink
    • PCB Design Export Guides
      • KiCad
      • OrCAD
      • EAGLE
      • Altium
  • Mastering Your V-One
    • Improving Print Quality
    • Aligned Printing
    • Purging Solder Paste
    • Filling an Empty Cartridge
    • Creating a Custom Ink Profile
    • Designing with PCB Templates
  • Troubleshooting
    • USB Connection Problems
    • Gerber Files Fail to Load
    • No Ink or Paste Comes Out
    • Cleaning Clogged Nozzles
    • Broken Nozzles
    • Difficulty Soldering
    • Measuring X-Axis Backlash
    • XY Center Different than Calibrated
    • P- Switch Did not Trigger
    • Z-min Switch Error
    • Installing on macOS 10.15 Catalina
  • Downloads
    • Download the V-One Software
    • User Manuals
    • Safety Data Sheets
    • Technical Data Sheets
    • Voltera CAM File for EAGLE
    • Substrates and Templates
    • Wallpapers
Powered by GitBook
On this page

Was this helpful?

  1. Getting Started

Hello World Project

PreviousQuickstart VideosNext1. Safety Guidelines

Last updated 11 months ago

Was this helpful?

The Hello World circuit is a basic LED circuit. Holding a 9-Volt battery to the + and - terminals on the circuit provides power, and a 555 timer integrated circuit (IC) controls the signal that flash the LEDs at a frequency determined by the resistors and capacitor.

We have included all the materials and components you need to print your first circuit in the Hello World kit. If you need another kit, you can grab one from .

our store