LogoLogo
V-OneNOVABack to Voltera.io
  • NOVA Support
  • Getting Started
    • Welcome to NOVA
    • Connecting NOVA
    • What's In The Box
    • Printer Anatomy
    • Software Overview
    • Safety Guidelines
    • NOVA Starter Project
      • Setup
        • Adding Materials
        • Mounting the Substrate
        • Dispenser Assembly
      • Print 1: Calibrate
      • Print 2: Dispense
      • Print 3: Selective Print
      • Print 4: Alignment
      • Legacy: First Print Project (Terra NOVA)
        • Adding Materials
        • Dispenser Assembly
        • Printing
        • Final Assembly
  • Get To Know NOVA
    • Dispenser Assembly & Disassembly
    • Swapping Tools
    • Print Settings Overview
    • Calibration
    • Adding a Substrate
    • Using the Vacuum Module
    • Using Mounting Hardware for Rigid Substrates
    • LED Light Status Indicators
  • Software
    • Software Overview
    • Release Notes
    • Offline NOVA Software Update
    • Measuring Snapshots from NOVA
  • Plan
    • Plan Overview
    • Updating NOVA to Plan
    • Designing Multi-Layer Artworks
    • Loading Artwork Files
    • Print Order
    • Toolpaths
    • Probe Targets
    • Saving and Dispensing Your Plan
  • Learn More
    • Why do we heat the Smart Dispenser?
    • Working with Custom Inks
    • Tips for V-One Users (Migrating to NOVA)
    • FAQ
  • Maintenance
    • NOVA Maintenance
    • Replacing a Smart Probe Stylus Tip
    • Purging your Nozzle
    • Port & Camera Alignment Calibration
  • Troubleshooting
    • Unable to Connect to NOVA
    • WIFI Network Instability
    • Mobile Hotspot Connection
    • Computer Loses Internet Connection when Connecting to NOVA over Ethernet
    • Corrupted Firmware
    • No Flow From Nozzle
    • Material Oozing or Leakage
    • Unable to Load File
  • Downloads
    • NOVA User Manual
    • Technical Data Sheets
    • Safety Data Sheets
Powered by GitBook
On this page

Was this helpful?

  1. Troubleshooting

Mobile Hotspot Connection

PreviousWIFI Network InstabilityNextComputer Loses Internet Connection when Connecting to NOVA over Ethernet

Last updated 6 months ago

Was this helpful?

If you need to set up an internet connection and there is no WIFI or ethernet network available, then you can connect to NOVA through a mobile hotspot. Keep in mind, connecting to a mobile device will utilize its connection, so you may use up a large amount of data.

Mobile Wifi Hotspot Setup

  1. On your mobile device, create a mobile 2.4GHz WIFI hotspot with the following credentials:

    SSID: NOVA

    Password: NOVA1234

  1. Connect your laptop to this network.

  2. If NOVA is powered on and has a WIFI Dongle connected, it will automatically connect to this network. You may need to power cycle NOVA for a connection to be established.

On the iPhone personal hotspot uses a 5GHz connection by default. On iPhone 12 or later, you can turn on Maximize Compatibility for Personal Hotspot to use a 2.4 GHz connection.

This can be found in the hotspot settings.

While this may be slightly unique to your specific android device you should be able to configure which frequency band your mobile hotspot is broadcasting within the hotspot settings.

Select the 2.4 GHz band.