NOVA Starter Project

The NOVA Starter project provides 4 different printing exercises to teach the fundamentals of using NOVA. This is a great starting place for any new NOVA user to become familiar with the machine and its software.

What’s included in the NOVA Starter Kit:

  • 1 x FR4 Substrate (Introduction to NOVA)

  • 1 x Speedball Screen-Printing Test Ink (2mL cartridge)

  • 4 x Nordson EFD 150 µm dispensing tip (30 gauge)


Overview

We'll start with a few setup steps where we’ll cover adding materials to the library, mounting the substrate, and assembling the Smart Dispenser. Then we'll go through each of the print exercises:

1

We’ll cover the Calibration workflow to dial in print settings for our new material directly on our substrate.

2

We’ll take those new print settings and go through the Dispenser workflow to print a simple pattern in another quadrant of our substrate.

3

This exercise will focus on selective printing, this can be useful for reprinting missed sections or testing out part of your print before committing to a large print.

4

Finally, in Print 4 we’ll focus on the alignment step of the Dispense workflow to get comfortable with more challenging alignment.

Before moving onto the setup step, we’re assuming that NOVA is unboxed, connected to the local network or computer, and ready for use. If that isn’t the case, please follow the steps in our NOVA setup Guide & Manual and return when NOVA is ready for use. If you’re having trouble getting your NOVA up and running feel free to reach out to our support team.


Terra NOVA Firt Print Project

Last updated

Was this helpful?