LogoLogo
V-OneNOVABack to Voltera.io
  • NOVA Support
  • Getting Started
    • Welcome to NOVA
    • Connecting NOVA
    • What's In The Box
    • Printer Anatomy
    • Software Overview
    • Safety Guidelines
    • NOVA Starter Project
      • Setup
        • Adding Materials
        • Mounting the Substrate
        • Dispenser Assembly
      • Print 1: Calibrate
      • Print 2: Dispense
      • Print 3: Selective Print
      • Print 4: Alignment
      • Legacy: First Print Project (Terra NOVA)
        • Adding Materials
        • Dispenser Assembly
        • Printing
        • Final Assembly
  • Get To Know NOVA
    • Dispenser Assembly & Disassembly
    • Swapping Tools
    • Print Settings Overview
    • Calibration
    • Adding a Substrate
    • Using the Vacuum Module
    • Using Mounting Hardware for Rigid Substrates
    • LED Light Status Indicators
  • Software
    • Software Overview
    • Release Notes
    • Offline NOVA Software Update
    • Measuring Snapshots from NOVA
  • Plan
    • Plan Overview
    • Updating NOVA to Plan
    • Designing Multi-Layer Artworks
    • Loading Artwork Files
    • Print Order
    • Toolpaths
    • Probe Targets
    • Saving and Dispensing Your Plan
  • Learn More
    • Why do we heat the Smart Dispenser?
    • Working with Custom Inks
    • Tips for V-One Users (Migrating to NOVA)
    • FAQ
  • Maintenance
    • NOVA Maintenance
    • Replacing a Smart Probe Stylus Tip
    • Purging your Nozzle
    • Port & Camera Alignment Calibration
  • Troubleshooting
    • Unable to Connect to NOVA
    • WIFI Network Instability
    • Mobile Hotspot Connection
    • Computer Loses Internet Connection when Connecting to NOVA over Ethernet
    • Corrupted Firmware
    • No Flow From Nozzle
    • Material Oozing or Leakage
    • Unable to Load File
  • Downloads
    • NOVA User Manual
    • Technical Data Sheets
    • Safety Data Sheets
Powered by GitBook
On this page
  • Toolpath Generation
  • Toolpath Editing

Was this helpful?

  1. Plan

Toolpaths

PreviousPrint OrderNextProbe Targets

Last updated 1 month ago

Was this helpful?

Plan now gives you greater control over how toolpaths are generated for each individual polygon. You can adjust individual polygon trace spacing, toolpath order, start and stop points, and much more. This added flexibility allows for more precise control over your print process.

Toolpath Generation

Toolpaths can be generated for all polygons by selecting the artwork layer (or multiple artwork layers), or for individual polygons by selecting them in the artwork tree.

Toolpath Editing

Delete Toolpaths

To delete toolpaths, click on the toolpath in the print area or the properties panel, then press the delete key or click the trash icon next to the highlighted toolpath in the properties panel. You can delete multiple toolpaths at once by ctrl-clicking or using click-and-drag to select a group of toolpaths in the print area.

Delete Toolpath Segments

You can also delete segments of a toolpath to split it into two. To do this, click on a toolpath segment in the print area and press the delete key.

Merge or Extend Toolpath Starts and Stops

To merge two toolpaths, click on a toolpath's start or stop in the print area and drag it until it overlaps with another toolpath's start or stop. You can also extend toolpaths by dragging the start or stop to your desired location.

Reorder toolpaths

You can also control the order in which toolpaths within a polygon are printed. To do this, select the polygon in the features panel and open the toolpaths tree in the properties panel. Then, click and drag the toolpaths to reorder them. The toolpath at the top of the list will be printed first, while the last toolpath in the list will be printed last.

Reverse Toolpath Starts and Stops

To reverse a toolpath's start and stop points, select the toolpath and click the reverse button next to it in the Properties Panel. You can also group select multiple toolpaths and click the "Reverse All" button to reverse the start and stop points for all selected toolpaths.