Dispenser Assembly

1

Mount the pressure sensor

Open the dispenser door and insert the couple with the pressure window facing the pressure sensing pin in the dispenser body.

Mounting the pressure sensor
2

Attach a nozzle

To attach your nozzle to the end of the coupler, hold the couple in place with your thumb, and twist the nozzle clockwise. Tightening by hand is all you need.

Attaching a nozzle
3

Secure the pressure sensor and nozzle

Close the dispenser door and secure it with the thumbscrew, tightening it clockwise.

Securing the pressure sensor
4

Insert a material

Remove the caps from both ends of your material’s cartridge and slide the cartridge into the dispenser body so it seats fully onto the coupler.

Inserting a material
5

Mount the motor plunger

Gently insert the motor plunger into the top of your material cartridge, aligning the notch on the motor body to the Voltera logo on the dispenser body. Once it bottoms out, twist the motor 90° clockwise to lock it in place.

Mounting the motor plunger

You now have a fully assembled smart dispenser that is ready to be mounted to NOVA.

Fully assembled smart dispenser

Last updated

Was this helpful?