V-One Drill Safety Information
Table of Contents
1. Introduction
The V-One drill attachment (the drill) is a precision tool for electronics prototyping, specifically intended as an add-on to extend the functionality of the Voltera V-One to allow drilling of holes in FR1 substrates. Please review the following documentation to ensure a safe work environment and maintain optimal machine performance.
V-One is not only an excellent tool for the seasoned electrical engineer but it is also a great way to teach electronics. The drill is for use as-is. Any modifications or improper use without explicit approval and direction from Voltera will void your warranty and can potentially damage the device and cause bodily harm.
Never leave V-One unattended while in use, and supervise young and inexperienced users to ensure safe operation. In case of emergency or prior to performing any maintenance, please ensure power cable is disconnected from the V-One and drill.
2. Markings and warning statements
2.1 Mechanical hazards
The drill contains rotating components that can cause serious injury.
Keep hands, hair, clothing, and jewelry away from the drill spindle.
Do not touch the drill bit while it is rotating.
Only interact with the drill after the software indicates motion has stopped.
Ensure the drill bit has fully stopped before removal or adjustment.
2.2 Sharp tools
2.3 Dust and debris
2.4 Electrical connections
Improper electrical use may result in electric shock or fire.
Use only the supplied power adapter.
Ensure the power adapter remains easily accessible during operation.
Disconnect power before servicing or cleaning.
Inspect cables regularly and discontinue use if damaged.
Keep liquids away from electrical components.
2.5 Personal protective equipment
Use appropriate personal protective equipment when operating the drill.
Safety glasses are required during drilling operations
Use a dust mask or respirator when drilling produces airborne debris.
Wear protective gloves when handling drill bits or debris.
2.6 Do not disassemble
The drill contains no user-serviceable parts.
Do not open or disassemble the drill assembly.
Unauthorized modification or repair may result in injury and will void the warranty.
Contact Voltera Support at [email protected] for service or repair.
3. Conformity
3.1 Product
Voltera V-One drill attachment
3.2 Manufacturer
Voltera Inc.
180 Northfield Dr W, Suite 2
Waterloo, ON N2L 0C7
Canada
3.3 Declaration
Voltera Inc. declares under its sole responsibility that the product Voltera V-One drill attachment complies with the directives 2014/35/EU and 2014/30/EU, as well as the harmonized standards and subsections IEC 61010-1:2010, IEC 61010-2-010:2019, IEC 61326-1:2021, and EN 55011 Class A. The full EU Declaration of Conformity can be presented upon request.
4. Disposal
At end of life, the Voltera V-One drill attachment and its electronic components must be disposed of through an approved electronic-waste collection or recycling facility; do not dispose of the unit with household waste.
5. Specifications
Disclaimer: Voltera reserves the right to change or update the following specifications at any time without notice. Please contact [email protected] for the most up-to-date information.
5.1 Hardware
Maximum speed
13,000 RPM
Maximum drill bit length
38.1 mm
1.5"
Maximum drill bit diameter
2 mm
0.078"
Maximum dimensions
84 × 39 × 59 mm
3.3 × 1.4 × 2.3’’
Weight
120 g
0.26 lb
Environmental conditions
Operating temperature
15-30°C
59-86°F
Maximum altitude
2000 m
1.24 miles
Relative humidity
80%
Pollution degree
2
Power requirements
100-240 VAC, 50/60 Hz
25 W DC, 12 V, 2.08 A
Other equipment
A V-One is required to operate the drill.
Last updated
Was this helpful?