2. Drill Maintenance

2.1 Inspect drill bits before use

Drill bits may break if not handled correctly or become dull with use. Ensure the drill bits are not damaged before using and inspect drill bits before storing.

2.2 Cleaning

During operation, the drill will generate dust debris. This debris should be cleaned after drilling has been completed using a dust extractor.

2.3 Replacement power cable

Replacement power cable varies depending on electrical standards of the country and locality of use.

Mains voltage	100-120 VAC	200-240 VAC
Length	≥ 1.8 m
Ratings	> 250 V, > 1 A
Termination	C14 to plug type B	C14 to plug type F