Probe Targets
Last updated
Was this helpful?
Last updated
Was this helpful?
Probing is a critical step for achieving a successful multilayer print. Since you're printing over multiple layers of ink, it's essential to create an accurate height map of the surface.
You can generate probe targets by selecting a layer, setting your probe pitch value, and clicking the Generate Probe Targets button.
We recommend using one probe pitch value for an entire artwork layer. We don't recommend generating probe targets with different settings at a per polygon level.
For multi-layer printing, probe points should be automatically generated at each layer overlap to account for any height changes. You may need to reduce the probe pitch to generate enough points for a precise height map, as shown in the design below:
If you notice that any key probe targets are missing you can add them by holding down alt and clicking on your design. You cannot add a probe point over a toolpath
With plan you can now customize the location of your probing targets by adding or deleting targets.
You can add probe targets by pressing the alt key and clicking on your design.
You can delete probe targets by selecting a target and clicking the delete key. You can select multiple targets at a time by holding down the ctrl key.
You cannot add a probe target over a toolpath when it is visible. When adding probe targets it is easiest to hide all toolpaths using the display menu.
