Camera Orientation Calibration

Safety first! Before starting any repair, take a moment to review the safety information in your user manual. An online version of the guidelines can also be found here.

Before you begin

This guide will take you through calibrating NOVAs camera orientation.

As you work through this guide please reach out to our email [e-mail] or through the chat if you run into any issues or have any questions. We are more than happy to assist you virtually with this.

When in doubt, reach out!

Estimated Time:

• 5 minutes

Camera Orientation Calibration

1

Connect to NOVA

Connect to your device via device-name.myvoltera.io

2

Remove the tools from NOVA

Ensure that there are no tools mounted to NOVA and that the printing and surrounding area is completely empty.

3

Enter Factory mode

Press Shift + 2 + 4 to unlock factory mode and navigate to the factory settings page

4

Camera Orientation Calibration

Open the Camera Orientation drop down and click the camera orientation button. Wait for the calibration to complete.

5

Exit Factory Mode

Press Shift + 2 + 4 to exit factory mode.

Calibration Complete!

Congratulations, you have successfully calibrated NOVA camera orientation!

Please reach back out to our support team through email ([e-mail]) or the chat to let them know everything went well or share any photos, details, and feedback.