> For the complete documentation index, see [llms.txt](https://docs.voltera.io/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.voltera.io/docs/nova/learn-nova/nova-software/nova-settings/probe-settings.md).

# Probe Settings

#### Probe Point Generation Algorithms

NOVA determines where to take surface measurements based on the algorithm selected:<br>

* **Original:** Uses NOVA’s standard grid-based distribution across the bounding area of your features.
* **Grouped Mesh (Experimental):** Intelligently groups adjacent geometries and creates custom boundary hulls, clustering probe points tightly around active traces while skipping empty areas between distant features.

<div><figure><img src="https://3113512132-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYKzrL5Rz2l0ufpEa39Yc%2Fuploads%2FXY7Yc5vdvlsOtEpCYgsM%2Fimage.png?alt=media&amp;token=1bb92946-8dd5-4afa-b499-1a3d0129d9da" alt=""><figcaption><p>Orignal Probe Algorithm</p></figcaption></figure> <figure><img src="https://3113512132-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYKzrL5Rz2l0ufpEa39Yc%2Fuploads%2F8eqBVHxOraoNkvEaRwbH%2Fimage.png?alt=media&amp;token=6c596085-1fc6-4348-9208-ae459b7e6659" alt=""><figcaption><p>Grouped Mesh Algorithm</p></figcaption></figure></div>

#### Grouped Mesh Configuration Parameters (Experimental Algorithm)&#x20;

{% hint style="warning" %}
**Experimental Settings:** Changing these values may **degrade** dispensing quality or system performance. Only adjust if you are familiar with custom toolpath and mesh generation. **Reset to default if needed.**
{% endhint %}

<figure><img src="https://3113512132-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYKzrL5Rz2l0ufpEa39Yc%2Fuploads%2FheiezkjQA3CFpAHn0wIn%2Fimage.png?alt=media&amp;token=1b8bcef3-d6d3-4852-85f2-6c68bc2e7cfe" alt=""><figcaption></figcaption></figure>

When Grouped mesh is selected, you can fine-tune point density, boundary shape, and coverage using the following settings:

<table data-header-hidden><thead><tr><th width="192.6666259765625"></th><th width="83.9998779296875"></th><th width="101.0001220703125"></th><th></th></tr></thead><tbody><tr><td><strong>Parameter</strong></td><td><strong>Default</strong></td><td><strong>Unit</strong></td><td><strong>Description</strong></td></tr><tr><td>Probe corner angle</td><td><code>30</code></td><td>Degrees (°)</td><td>Determines the minimum corner angle required to place an explicit probe point along feature boundaries. Smaller angles add points to sharper corners for tighter outline tracking.</td></tr><tr><td>Hull probe pitch factor</td><td><code>1</code></td><td>Multiplier of probe pitch</td><td>Scales the spacing (pitch) between probe points placed along the outer perimeter (convex hull) of grouped features. Lower values increase perimeter point density; higher values spread points farther apart.</td></tr><tr><td>Hole size threshold factor</td><td><code>2</code></td><td>Multiplier of pitch diameter</td><td>Sets the cutoff size for internal voids or cutouts within a feature group. Open regions larger than this threshold will not be probed, saving calibration time on empty interior substrate areas.</td></tr><tr><td>Mesh expand ratio</td><td><code>0</code></td><td>Percent (%)</td><td>Expands the outer boundary of the probe hull beyond the physical edges of your features. Use this buffer when dispensing close to substrate edges or when material spreading requires extra clearance.</td></tr><tr><td>Simplification ratio</td><td><code>10</code></td><td>Percent (%)</td><td>Controls point decimation along relatively straight contours. Higher percentages remove redundant collinear probe points, reducing probing time without sacrificing heightmap fidelity.</td></tr></tbody></table>

#### When to Use Grouped Mesh

* Sparse & Distributed Layouts: When components or traces are separated by wide gaps, avoiding unnecessary probing across empty substrate spans.<br>
* Complex Feature Perimeters: When tracing irregular boards, curved edges, or dense routing paths where contour accuracy directly dictates dispensing consistency.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.voltera.io/docs/nova/learn-nova/nova-software/nova-settings/probe-settings.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
