English
NOVA Safety Information
1.0 Introduction
NOVA is a flexible and accessible platform which is designed to be easy to use. However, proper training and supervision is required to ensure safe operation. As with any lab equipment, NOVA and the accompanying materials and modules should be handled with care and you should read this manual carefully before using NOVA.
NOVA is for use as-is. Any modifications to the machine or improper use, including unauthorized repairs, without explicit approval or direction from Voltera, may damage the machine or cause bodily harm and will void your warranty.
In case of emergency or prior to performing any Voltera-directed hardware maintenance, please ensure that the power cable is disconnected from NOVA.
2.0 Markings and warning statements
2.1 Mechanical hazards
Gantry Bridge, Module Hub, and Smart Probe
Keep hands away from NOVA when the system is moving to avoid injury. The gantry, module hub, and Smart Probe create pinch hazards when the system is in motion. Stay clear while the machine is in use.
Precision nozzles are sharp
Precision nozzles can pierce skin. Handle with care when fitting nozzles to the Smart Dispenser and keep hands clear of the machine when the dispenser is in use and the system is in motion.
Eye protection
Wear eye protection if using the Smart Probe module with custom fixturing, printing on 3D structures, or when using mounting accessories. If the Smart Probe stylus contacts a hard surface during travel, it can fracture and create shrapnel.
Hearing protection
NOVA contains vacuum pumps which can be loud at maximum power. Wear hearing protection if the pumps are run above 30% duty cycle for extended periods.
2.2 Hot surfaces
Smart Dispenser heater
The Smart Dispenser contains a 12W heater with a maximum working temperature of 65°C (149°F). If damaged, this temperature can reach 80°C (176°F). Take care when handling a hot dispenser. Allow the Smart Dispenser to cool before handling or servicing.
2.3 Application-specific inks, materials, and cleaning agents
Material safety is the user’s responsibility
Materials supplied by Voltera are intended for use with NOVA when handled according to their SDS. Always review the applicable SDS before use. It is your responsibility to ensure that third-party inks, substrates, and cleaning agents will not cause a hazard on their own or as a result of a reaction with one another or with NOVA.
Protective gloves
Wear protective gloves when handling conductive inks, solvents, or other electronic materials. Consult the SDS before using.
2.4 Electrical connections
Only mount approved modules
Never touch the electrical contact pins while the locking lever on the module hub is engaged. NOVA will only accept Voltera approved modules.
Ensure power adapter is accessible
Ensure the connecting power adapter is easily accessible when using the machine, including the connection to NOVA. Do not place the power adapter in a place that is difficult to reach.
2.5 Two person lift
Heavy equipment
NOVA weighs 35 kg (77 lb.) and should always be lifted by two people. Lift by the base with two hands. Do not lift by the bridge or gantry, as this will affect calibration. Place NOVA carefully to avoid damage.
2.6 Do not disassemble
NOVA is not user-serviceable
NOVA is not user-serviceable. Do not open or disassemble NOVA or any Voltera modules except at the express direction of Voltera. See Section 1.0 for modification and warranty terms.
3.0 Conformity
3.1 Product
Voltera NOVA, 100V-240 VAC, 50/60 Hz
3.2 Manufacturer
Voltera Inc. 180 Northfield Dr W, Suite 2 Waterloo, ON N2L 0C7 Canada
3.3 EU Certifications
Voltera NOVA complies with the following EU directives and harmonised standards:
Directives:
2014/35/EU (Low Voltage Directive)
2014/30/EU (Electromagnetic Compatibility Directive)
Harmonised standards:
EN 61010-1:2010/A1 (Safety requirements for electrical equipment, incorporating Amendment 1:2016)
IEC 61010-2-010:2019 (Particular requirements for laboratory equipment designed for the heating of materials)
EN IEC 61326-1:2021 (EMC requirements for electrical equipment for measurement, control, and laboratory use)
3.4 North American Certifications
Safety:
UL 61010-1 (3rd Edition), Amendment 1 (United States)
CAN/CSA-C22.2 No. 61010-1 + Amendment 1 (Canada)
Electromagnetic compatibility:
FCC 47 CFR Part 15, Subpart B (United States)
ICES-003 Issue 7, 2020 (Canada)
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ICES-003 Compliance Statement
This ISM device complies with Canadian ICES-003. Cet appareil ISM est confiorme a la norme canadienne ICES-003.
4.0 Disposal
At end of life, dispose of NOVA through an approved electronic-waste collection or recycling facility; do not dispose of it with household waste. This product complies with the EU WEEE Directive (2012/19/EU) and RoHS Directive (2011/65/EU as amended by 2015/863).
5.0 Operating limits
Environmental conditions
Ambient operating temperature
14-30°C (57-86°F)
Maximum altitude
2,000 m (6,560 ft.)
Relative humidity
Up to 80%, non-condensing
Pollution degree
2
Power requirements
Input
100-240 VAC, 50/60 Hz (via supplied power adapter)
Voltage
24 VDC
Maximum current
9.2 A
Power
221 W
Last updated
Was this helpful?